Dura-Double
Rod
| Double rod end cylinders
operate with a single piston and two opposing rods. As
one extends, the other retracts. As a result, the two
ends can do reciprocal work in positioning or in moving
a work piece with equal force, equal stroke length and
equal speed. |
 |
|
Dura
Back-To-Back
| This double rod end
cylinder provides four operating positions comparable to
two back-to-back cylinders. The center head has two
ports and the opposite rods can have different lengths
and strokes for an infinite series of combinations. |
 |
|
Dura-E Rod End
Styles
photograph not available
|
Dura-Power
Multiplier
| This cylinder is for
applications requiring higher forces with restricted
mounting space. Each stage is an individually ported
chamber with its own piston. The combined effect of the
multiple ports acting on multiple pistons greatly
increases the effective piston area thereby increasing
the cylinder's force. These cylinders can be configured
to multiply both the extend force and the retract force. |
 |
|
Dura
Multi-Position
| Rod cylinders need not
be limited to only two positions. With multiple rods &
pistons "chained" together, a single rod end can have
multiple stopping points or 'stages'.
Dura-Multi-Position cylinders have been built with as
many as 9 stages and varying strokes at each stage.
Consult the factory for help with your own custom
application. |
 |
|
